In article <391029e6.300080…@news.iprolink.ch>, e…@bussink.ch.nul (Erik Bussink) writes:
: Any one got an idea what the Console port (dsub 9pin) settings
:are on a MicroVAX 2 (630QB-A3), there is a switch for the speed, but
:I can’t get any output on a VT320.
Hoff Hoffman answered:
Please take a look at the OpenVMS FAQ — it has a section on the MicroVAX
console bulkhead and operation, and information on many other topics.
(This is not the first time this question has been asked, obviously.)
If you can’t get _any_ output (including simply garbage characters) on
the console, then you probably have the wrong pinout, or you have a
hardware or wiring problem. The OpenVMS FAQ also has the MicroVAX DB9
pinout — and it’s not the same DB9 pinout that is used on PC systems.
The OpenVMS FAQ is available via a link at: